This is the "LabQuest" page of the "Tool Library" guide.
Alternate Page for Screenreader Users
Skip to Page Navigation
Skip to Page Content

Tool Library  

Information on the Tools available for checkout at the Lichtenberger Engineering Library
Last Updated: Aug 7, 2014 URL: http://guides.lib.uiowa.edu/toollibrary Print Guide RSS UpdatesEmail Alerts

LabQuest Print Page
  Search: 
 
 

LabQuest Data Collector Device

Product Description:

  • To be used with LABQUEST Accessories
  • Included: (1) rechargeable battery, (1) power adapter, (1) USB cable, (1) stylus, and (1) stylus tether
  • Device used to collect data in experiments using LABQUEST accessories.
  • Contains internal sensors including GPS, accelerometers, temperature, light sensor, and microphone
  • Quick Start Guide

Location:

Tool Sponsor:

Engineering Electronics Shop

 

LabQuest Power Amplifier

Product Description:

  • To be used with LABQUEST 2 Data Collector Device in box labeled LABQUEST COPY 1 or 2
  • Included: (1) female power adapter, (1) male power adapter cord, (1) Audio/LabQuest cable, and (1) current sense and LabPro input cable
  • Allows you to drive loads with ±10 V and currents up to 1 A.
  • Works with any input waveform.
  • Can drive a variety of loads, such as speakers, lamps, small DC motors, and RLC circuits. These circuits typically draw more power than the signal source can deliver.
  • User Manual

Location:

Tool Sponsor:

Engineering Electronics Shop

 

LabQuest Surface Temperature Sensor

Product Features:

  • To be used with LABQUEST Data Collector Device in box labeled LABQUEST COPY 1 or 2
  • Designed for use in situations in which low thermal mass or flexibility is required
  • Temperature range: –25 to 125°C (–13 to 257°F)
  • User Manual

Warning:

The Surface Temperature Sensor is for use in air and water only.

Location:

Tool Sponsor:

Engineering Electronics Shop

 

LabQuest Electrode Amplifier

Product Features:

  • To be used with LABQUEST Data Collector Device in box labeled LABQUEST COPY 1 or 2
  • Can produce an output in mV, pH (when using a pH electrode), or you can perform your own 2-point, linear calibration.
  • Amplifies the voltage produced by an electrode into a range where it can be monitored by the lab interface.
  • User Manual

Location:

Tool Sponsor:

Engineering Electronics Shop

 

LabQuest 3-Axis Accelerometer

Product Description:

  • To be used with LABQUEST 2 Data Collector Device in box labeled LABQUEST COPY 1 or 2
  • Consists of three –5 to +5 g accelerometers mounted in one small block.
  • Able to graph any of these components or calculate the magnitude of the net acceleration.
  • User Manual

Location:

Tool Sponsor:

Engineering Electronics Shop

 

LabQuest Instrumentation Amplifier

Instrumentation Amplifier

Product Description:

  • To be used with LABQUEST 2 Data Collector Device in box labeled LABQUEST COPY 1 or 2
  • Provides the necessary gain and offset to allow you to connect a wide variety of measurement equipment to your interface and electronically collect, store, and analyze the data.
  • User Manual

Location:

Tool Sponsor:

Engineering Electronics Shop

 

LabQuest Watts Up Pro

Product Description:

  • To be used with LABQUEST 2 Data Collector Device in box labeled LABQUEST COPY 1 or 2
  • A simple and rugged sensor designed to measure temperature in the range of –200°C to 1400°C.
  • This sensor could be used to study how the temperature inside a Bunsen burner flame varies with position, compare the temperatures of different flames (candles vs. Bunsen burner), check the calibration of ovens, experimentally determine the melting point of copper, bismuth, or other solids; or measure the temperature of dry ice or liquid air.
  • User Manual

Warning:

Only use the included blue USB cable with the Watts Up Pro.

Location:

Tool Sponsor:

Engineering Electronics Shop

 

LabQuest Goniometer

Product Description:

  • To be used with LABQUEST 2 Data Collector Device in box labeled LABQUEST COPY 1 or 2
  • Included:  (1) 12-inch flexible joint arm, (1) 10-inch flexible joint arm, (1) 8-inch flexible joint arm, (2) 24-inch elastic hook and loop straps, and (2) 14-inch elastic hook and loop straps
  • Measures the angle of a joint, such as the knee or elbow.
  • A set of elastic straps can be used to secure the sensor to the subject for dynamic measurements of joint angle during different types of physical activity.
  • User Manual

Location:

Tool Sponsor:

Engineering Electronics Shop

 

LabQuest Microphone

Product Description:

  • To be used with LABQUEST 2 Data Collector Device in box labeled LABQUEST COPY 1 or 2
  • Used for a variety of activities with sound waves.
  • Frequency range is approximately 100 Hz to 15 kHz.
  • User Manual

Location:

Tool Sponsor:

Engineering Electronics Shop

 

LabQuest Dual Range Force Sensor

Product Description:

  • To be used with LABQUEST 2 Data Collector Device in box labeled LABQUEST COPY 1 or 2
  • Included:  (1) black screw, (1) bumper, (1) utility handle, and (1) hook
  • For measuring pushing and pulling forces in a variety of experiments.
  • Measures forces from 0.01 to 50 Newtons.
  • User Manual

Location:

Tool Sponsor:

Engineering Electronics Shop

 

LabQuest EKG Sensor

Product Description:

  • To be used with LABQUEST 2 Data Collector Device in box labeled LABQUEST COPY 1 or 2
  • Measures electrical potential waveforms (voltages produced during the contraction of the muscle).
  • Monitor EKG, study the meaning of P, Q, R, S, and T waveforms, determine the axis of the heart, investigate the effect of the central nervous system influence on reflex amplitude, and associate the electrical activity of a muscle with movement of joints.
  • User Manual

Location:

Tool Sponsor:

Engineering Electronics Shop

 

LabQuest Rotary Motion Sensor

Product Description:

  • To be used with LABQUEST 2 Data Collector Device in box labeled LABQUEST COPY 1 or 2
  • Included:  (1) thumb screw, (1) 3-step pulley and mounting screw, (1) O-ring, and (1) sensor clip
  • A bidirectional angle sensor designed to measure rotational or linear position, velocity, and acceleration.
  • User Manual

Location:

Tool Sponsor:

Engineering Electronics Shop

 

LabQuest Low-g Accelerometer

Product Description:

  • To be used with LABQUEST 2 Data Collector Device in box labeled LABQUEST COPY 1 or 2
  • Measures acceleration along the line marked by the arrow on the label
  • Accelerations are normally measured in either meters per second per second (m/s2) or g’s.
  • User Manual

Location:

Tool Sponsor:

Engineering Electronics Shop

 

LabQuest Thermocouple

Product Description:

  • To be used with LABQUEST 2 Data Collector Device in box labeled LABQUEST COPY 1 or 2
  • A simple and rugged sensor designed to measure temperature in the range of –200°C to 1400°C.
  • This sensor could be used to study how the temperature inside a Bunsen burner flame varies with position, compare the temperatures of different flames (candles vs. Bunsen burner), check the calibration of ovens, experimentally determine the melting point of copper, bismuth, or other solids; or measure the temperature of dry ice or liquid air.
  • User Manual

Location:

Tool Sponsor:

Engineering Electronics Shop

 

LabQuest Stainless Steel Temperature Probe

Product Description:

  • To be used with LABQUEST 2 Data Collector Device in box labeled LABQUEST COPY 1 or 2
  • Typical uses include heat of fusion experiments, weather studies monitoring endothermic exothermic reactions, specific heat experiments, and insulation studies.
  • Temperature range: –40 to 135°C (–40 to 275°F)
  • User Manual

Warning:

Do not completely submerge the sensor. The handle is not waterproof.

Location:

Tool Sponsor:

Engineering Electronics Shop

 

LabQuest Go!Motion

Product Description:

  • To be used with LABQUEST 2 Data Collector Device in box labeled LABQUEST COPY 1 or 2
  • Included:  (1) USB cable
  • Used to collect position, velocity, and acceleration data of moving objects
  • Range of 0.15 to 6 meters.
  • User Manual

Location:

Tool Sponsor:

Engineering Electronics Shop

 

LabQuest Wireless Dynamics Sensor System

Product Description:

  • To be used with LABQUEST 2 Data Collector Device in box labeled LABQUEST COPY 1 or 2
  • Included:  (1) power adapter, (1) black plastic plate, (2) hooks of varying sizes, (1) metal screw extension, (1) bumper, (5) screws of varying sizes and shapes, and (1) silver metal rod with eyelet
  • Allows you to take data from a three-axis accelerometer, force sensor, and altimeter, using a Bluetooth® wireless connection to your computer
  • User Manual

Location:

Tool Sponsor:

Engineering Electronics Shop

 

LabQuest Magnetic Field Sensor

Product Description:

  • To be used with LABQUEST 2 Data Collector Device in box labeled LABQUEST COPY 1 or 2
  • Measures a vector component of the magnetic field near the sensor tip.
  • The tip can be adjusted, allowing the user to measure fields that are parallel or perpendicular to the long axis of the sensor.
  • User Manual

Location:

Tool Sponsor:

Engineering Electronics Shop

 

LabQuest Sound Level Meter

Product Description:

  • To be used with LABQUEST 2 Data Collector Device in box labeled LABQUEST COPY 1 or 2
  • Included:  (1) sound level meter cable (1) Wind screen (black foam cover for the sensing element)
  • Measures sound level in decibels.
  • Measurement range:
    • Low: 35 dB to 90 dB
    • High: 75 dB to 130 dB
  • User Manual

Location:

Tool Sponsor:

Engineering Electronics Shop

 

LabQuest Force Plate

Product Description:

  • To be used with LABQUEST 2 Data Collector Device in box labeled LABQUEST COPY 1 or 2
  • Included: (2) handles
  • Can measure the forces developed during stepping, jumping, and other human-scale actions.
  • With handles in place, you can support the unit by hand for pushing on a wall or other large object, or you can attach an optional second pair of handles for pulling experiments.
  • User Manual

Location:

Tool Sponsor:

Engineering Electronics Shop

Description

Loading  Loading...

Tip